Car/Light Commercial Weld Training

Car/Light Commercial Weld Training

Spot Welding, 

MIG/MAG Steel Welding and MIG Brazing

What does the course entail?

 

On site testing and training for UK mainland with national coverage. This reduces down time, overnight expenses and the candidate is tested on his own equipment that he uses every day on the vehicles he welds.

 

Stanners specialised services have a dedicated team of CSWIP qualified inspectors to carry out BS1140 spot and BS4872 mig test training.

 

Our weld inspectors are recognised and accepted by major manufacturers including BMW, Mercedes VW, Audi, Vauxhall and Porsche. All our BS certificates are recognised for quality of testing and accepted for all manufacturer audits.

 

Pre- training courses are available but our inspectors will alway try to guide the candidate through the test within the guidelines set by the BSI.

 

For car and light commercial we usually recommend a test done in 1mm covering a technician from 0.75mm upto 1.5mm. Then also a 2mm weld test done which covers the technician to weld a thickness range from 1.5mm up to 3mm. This is a selection of joints and weld positions covering different possibilities to weld a vehicle. Our standard BS test includes the ATA009 module for repairers who need this certificate. (The IMI registration is at an extra charge)

 

If you are approved for certain manufactures such as Mercedes, BMW, JLR, Vauxhall, Porsche then both a 1mm and 2mm BS4872 and BS1140 certificates are required for time of audit.

 

All welds are macro tested on site in front of the candidate to give a full transparent service.

 

How long is the Certificate valid for?

Certificate lasts for 2 years.

How long does the course take?

1mm BS1140 and BS4872 - 1 hour to 1.5 hours

2mm BS1140 and BS4872 - 1 hour to 1.5 hours

Can you tailor the course to suit my needs?

 

Bespoke tests and training can also be organised to customers individual requirements.

How do i get in touch?

 

Please call 01670 514133 for more info, or click the button to the right if you have a query or wish to book.

Individual technicians can be charged for or we can do a day rate or half a day rate.

OPENING HOURS

ADDRESS

MONDAY-FRIDAY

8.30AM-5.00PM

​SATURDAY-SUNDAY

Closed

 

FIND​ US

  • Twitter Square

Coopies Lane Industrial Estate

Morpeth

Northumberland

NE61 6JN

stanners@stanners-equipment.co.uk

Tel: 01670 514133
Fax: 01670 515492

Registered Office: Coopies Lane Ind. Est, Morpeth, Northumberland, NE61 6JN

Stanners Equipment Ltd. Company Reg. No: 1506945

Stanners Specialised Services LLP Company Reg. No: OC342971

Follow us on Twitter!