QuickPull 3000 Speed

The Stanners QuickPull 3000 Speed is used in fast repair work for light body collision repair/maintenance/diagnosis for vehicles with high working efficiency.

The four adjustable lifting arms move in 180°, allowing the bench to be used as a scissor lift, making it easy to use on nearly all vehicles. The swivel dozer has multiple pulling angles and heights including downward pull and can be moved 360°around the bench, always achieving maximum pulling force, no matter what height. 


The adjustable heavy duty clamps are easy to set-up and remove and feature vertical adjustment for easy locating and clamping with separate lifting feet, meaning that the vehicle is quicker to load and safer for the operator since the vehicle is at a better working height than using wheel buckets alone.

Using the wheel buckets, the vehicle can be lowered, making the jig available for use on other vehicles in a busy workshop. The operator has the choice to use sill clamp arms where the lifting arms would usually sit.


There is an option to raise the sill clamps which allows measuring to take place. Includes full chain and pulling clamp kit. For cars without sills e.g. BMW, Mercedes-Benz and Renault, sill adaptors are available to hire.

TECHNICAL SPECIFICATIONS:

LIFTING CAPACITY: 3000kg

PULLING POWER: 6 Ton

HEIGHT IN SHRUNK FORM: 115mm

MAX LIFTING HEIGHT: 1400mm

QuickJig 4000

Stanners offers the new QuickJig 4000.


With 2x 360 degree pulling towers offering 10 ton pulling force anywhere around the jig, this versatile jig can also be used as a scissor lift.


Supplied with various pulling clamps, hooks and tools, and with an electronic hydraulic pump, the QuickJig 4000 can be operated quickly.

 

The multi-function folding ramps allow the
vehicle to be supported whilst the vehicle is clamped up for repair.

TECHNICAL SPECIFICATIONS:

LIFTING CAPACITY: 4000kg

PULLING POWER: 10 Ton

BED LENGTH: 4160mm

POWER: 400v Control Box with remote

Quick Pull 2000

Stanners introduces the Quick Pull 2000, the pulling bench ideal for all body shops.

The time you need to put the vehicle on the bench and start working is about 10 minutes.

In shrunk form, it's low ground clearance of 100 mm allows any automobile to roll on freely, without any lifting equipment needed.

The four wheel stands are on wheels and the four brackets come with a measuring tape so centering the vehicle is very easy.

 

It has 10 ton pulling arm that can be mounted anywhere (360°) around the bench, keeping the pulling power the same at any height - during pulling, the chain never changes its angle.

TECHNICAL SPECIFICATIONS:

FRAME LENGTH: 2300mm

FRAME WIDTH:880mm

LIFTING CAPACITY: 3000kg

PULLING POWER: 10 Ton

HEIGHT IN SHRUNK FORM: 100mm

MAX LIFTING HEIGHT: 1100mm

Air-Hydraulic Pump: 500bar-700bar

Quick Pull 3000

Stanners introduces the Quick Pull 3000, the pulling bench ideal for all body shops.

The time you need to put the vehicle on the bench and start working is about 10 minutes.

In shrunk form, it's low ground clearance of 110 mm allows any automobile to roll on freely, without any lifting equipment needed.

The four wheel stands are on wheels and the four brackets come with a measuring tape so centering the vehicle is very easy.

 

It has 10 ton pulling arm that can be mounted anywhere (360°) around the bench, keeping the pulling power the same at any height - during pulling, the chain never changes its angle.

TECHNICAL SPECIFICATIONS:

FRAME LENGTH: 3000mm

FRAME WIDTH:880mm

LIFTING CAPACITY: 3000kg

PULLING POWER: 10 Ton

HEIGHT IN SHRUNK FORM: 110mm

MAX LIFTING HEIGHT: 1200mm

(also possible to reach 1700mm as optional)

ELECTRO-HYDRAULIC UNIT: 1,8kw 380v

Quick Pull 4000

TECHNICAL SPECIFICATIONS:

FRAME LENGTH: 4000mm

FRAME WIDTH:880mm

LIFTING CAPACITY: 3000kg

PULLING POWER: 10 Ton

HEIGHT IN SHRUNK FORM: 110mm

MAX LIFTING HEIGHT: 1200mm

(also possible to reach 1700mm as optional)

Electro-Hydraulic Unit: 1.8kw, 380v

Stanners introduces the Quick Pull 4000, the pulling bench ideal for all body shops.

The Stanners Quick Pull 4000 is a 4 meter pulling bench with a wide scope of use.

 

On it you can clamp small cars, limousines, commercial vehicles, mini buses etc.. with overall length of more than 5.30mtrs!

The time you need to put the vehicle on the bench and start working is about 10 minutes.

In shrunk form, its low ground clearance of 110 mm allows any automobile to roll on freely without any lifting equipment needed.

 

The four wheel stands are on wheels and the four brackets come with a measuring tape socentering the vehicle is very easy.

 

It has 10 ton pulling arm that can be mounted anywhere (360°)around the bench,keeping the pulling power the same at any height - during pulling the chain never changes its angle.

OPENING HOURS

ADDRESS

MONDAY-FRIDAY

8.30AM-5.00PM

​SATURDAY-SUNDAY

Closed

 

FIND​ US

  • Twitter Square

Coopies Lane Industrial Estate

Morpeth

Northumberland

NE61 6JN

stanners@stanners-equipment.co.uk

Tel: 01670 514133
Fax: 01670 515492

Registered Office: Coopies Lane Ind. Est, Morpeth, Northumberland, NE61 6JN

Stanners Equipment Ltd. Company Reg. No: 1506945

Stanners Specialised Services LLP Company Reg. No: OC342971

Follow us on Twitter!